Using a pre-amp along with your pick-up will usually make your harp sound even better, and give you more volume and tone control at your fingertips.
The Fishman G-II, designed for acoustic instruments, is perfect for most solo harp players.
It features volume, bass and treble controls, an easy-access battery compartment, AC adapter jack (adapter sold separately), and a rugged injection-molded case.
This pre-amp is powered by a 9 volt battery, or can use the outlet adapter that we sell with the Boss tuners.You will need 2 instrument cables to connect the pre-amp to your pick-up and amplifier.
Save $20 when you purchase your Fishman Pick-Up and Fishman Pre-amp at the same time.
See chart below for more detailed specifications.
| Fishman G-II Pre-Amp |
| Nominal input level
|
-20 dBV |
Input overload
(20 Hz to 20 kHz) |
+8 dBV |
| Input impedance
|
10 MOhm |
| Output impedance
|
Less than 3.5 kOhm
|
| Nominal output level
|
-20 dBV with input gain control at minimum position
-8 dBV with input gain control at maximum position |
| THD |
.01% at 1 kHz,
-10 dBV input, -4 dBV output |
| Signal to noise ratio
|
91 dB (A weighted,
-10 dBV input, -4 dBV output) |
| Bass control range
|
± 11 dB at 60 Hz,
± 3 dB at 350 Hz |
| Treble control range
|
± 11 dB at 10 kHz,
± 3 dB at 2.4 kHz |
| Current drain |
Less than .4 mA
|
| Power supply: Battery
|
9V alkaline battery
(estmated 1400 hours
continuous use) |
| Power supply: Adapter
|
Regulated 9V AC Adapter tip = negative 9V
Compatible with Boss PSA-120T
|
| Optional belt clip
|
Included |
| Input |
The input accepts all piezo and magnetic pickups (passive or active). When you plug in here, the 9-Volt battery switches on.
|
| Output |
Plug a standard instrument cable from the output to a stage amp, DI or an unbalanced microphone input on a Mixer.
|
